The C/3U is a Miniature Soldering Iron Hand piece. The Model C is a 15 watt, 115V soldering iron. This Miniature Soldering Iron is equipped with a 3 wire, grounded, ultra flexible cord with a 3-prong plug. The C/3U is ideal for precision electronic prototype, rework and assembly operations, where more heat is required. Each iron features a heating element directly under the tip for optimum thermal efficiency. Distributing the power right where it is needed. There are more than 50 special solder tips (140 Series) available that slide-on directly over the heating element. The C/3U is designed for faster heat up, quicker recovery times and a cooler handle. The C/3U has a shortened distance from your fingertips to the end of the tip, this was done to give the operator greater control and accuracy. It only takes 45 seconds to heat to working temperature. The C/3U is rated for working temperatures of 665° to 700°F.
The C/3U is a Miniature Soldering Iron Hand piece. The Model C is a 15 watt, 115V soldering iron. This Miniature Soldering Iron is equipped with a 3 wire, grounded, ultra flexible cord with a 3-prong plug. The C/3U is ideal for precision electronic prototype, rework and assembly operations, where more heat is required. Each iron features a heating element directly under the tip for optimum thermal efficiency. Distributing the power right where it is needed. There are more than 50 special solder tips (140 Series) available that slide-on directly over the heating element. The C/3U is designed for faster heat up, quicker recovery times and a cooler handle. The C/3U has a shortened distance from your fingertips to the end of the tip, this was done to give the operator greater control and accuracy. It only takes 45 seconds to heat to working temperature. The C/3U is rated for working temperatures of 665° to 700°F.
The C/3U is a Miniature Soldering Iron Hand piece. The Model C is a 15 watt, 115V soldering iron. This Miniature Soldering Iron is equipped with a 3 wire, grounded, ultra flexible cord with a 3-prong plug. The C/3U is ideal for precision electronic prototype, rework and assembly operations, where more heat is required. Each iron features a heating element directly under the tip for optimum thermal efficiency. Distributing the power right where it is needed. There are more than 50 special solder tips (140 Series) available that slide-on directly over the heating element. The C/3U is designed for faster heat up, quicker recovery times and a cooler handle. The C/3U has a shortened distance from your fingertips to the end of the tip, this was done to give the operator greater control and accuracy. It only takes 45 seconds to heat to working temperature. The C/3U is rated for working temperatures of 665° to 700°F.
C/3U Dimensions :
-Overall Length: 8"
-Handle Length: 2-3/4"
-Shaft & Tip Length: 3"
-Shaft Diameter: 0.135"
[ITEMPRICE]