The F1 is an Axial Component Trimmer and Former. This manual, hand-crank unit cuts and bends each side of an Axial Component to a 90° angle for horizontal mount (Flush Mount) configuration. The F1 has a high speed output of 26 components per turn. All cut lengths are easily adjusted merely by loosening two screws. Each lead is over bent to compensate for lead spring back. The F1 Axial Component Trimmer comes complete with a bench clamp and an easy to use set-up gauge.
F1 Spec's :
-Body Diameter : Min. 0.01" Max. 1"
-Body Length : Max. 1.88"
-Lead Diameter : Min. 0.01" Max. 0.05"
-Lead Length : Min. 0.12" Max. 0.63"
-Component Width : Min. 0.75" Max. 4.63"
-Tape Component Distance : Min. 0.15" Max. 2"
-Tape Width : Max. .375"
*Optional Reel Holder (RH1) accepts all standard reels and easily mounts to processor with two thumbscrews. The RH1 is designed for use with the R1 Radial Component Trimmer and the F1 Axial Component Trimmer/Former.
