Nitrogen Inerting (GF-12-N) - With each isolated chamber (Zone) design, low oxygen levels are maintained, while conserving nitrogen consumption. This is accomplished by re-circulation of the atmosphere within the reflow zone. This decreases wetting angle, while increasing flux efficiency and enhances fine pitch solder fillets, leaving behind improved surface finish of the solder joints. PC Interface (GF-PCI) - This optional PC software Interface is designed to provide more in-depth input and output readings than a traditional "On-Board" Interface. Link to a PC or laptop and receive instant Software Updates and full-screen colored graphical profiles, providing a feature-rich visual presentation of data. Profiling Accessory Kit (PAK-6) - This optional feature includes all the accessories you need to profile PC boards through your reflow oven. It is compatible with any oven or profiling systems, which uses standard K-type thermocouples. *This accessory kit is available with 10 ft. (PAK-10) or 16 ft. (PAK-16) Thermocouples. Optional Oven Stand (GF-12-ST) - This optional Oven Stand is a Two-Door enclosed cabinet. This cabinet is designed to support the GF-12HT Reflow Oven.
Max Board Width: 12" (305mm)Max Board Height: 1.375" (35mm)Heating Zones: 3 top, 3 bottomMax Temperature: 662°F (350°C)Heat Tunnel Length: 26" (660mm)Cyclonics™ (forced air): Six (6)Cooling Station(s): One (1)Venting: 4" flange, 100 CFM max.Cooling Zone Venting: N/ANitrogen Option: Yes (GF-12-N)PC Interface: Optional (GF-PCI)Overall Dimensions (L x W x H): 39" x 32" x 19"H (990mm x 813mm x 483mm)
[ITEMPRICE]