The DDM Novastar SPR-20 is a Bench-Top Style, Manual Stencil Printer. The SPR-20 Stencil Printer is designed for low to medium volume assembly runs. This stencil printer provides precise X, Y, Z and Theta Axis Controls. These controls allow for accurate, consistent deposition of solder paste or masking material for SMT work. The SPR-20 offers a durable, easy-to-use system with reliable and repeatable results. Each DDM Novastar Stencil Printer is compatible with a Nesting Kit (SPR-20-DNK - Sold Separately) for double-sided Printed Circuit Boards (PCB's). This kit includes assorted Magnetic Edge-Rails and a Magnetic Plate which attaches to the Base Plate. (Note: SPR-10 & SPR-25 Need NO Magnetic Plate) The SPR-20 Manual Stencil Printer comes as a complete printing kit, providing a Polyurethane Squeegee & Holder, One (1) Tubular Frame and a Lexan® Fixture.
The SPR-20 offers many features including but not limited to, a rugged, welded Steel Frame, precision engineered for Fine-Pitch Electronics, Fine X, Y, Z and Ø (Theta) Adjustments for an exact stencil-to-board alignment on every assembly. The "True" Theta Adjustment (From exact Center Point) allows for an enhanced alignment ease. Each Stencil Printer is designed for quick and easy Stencil change-over for short set-up times, the Squeegee Holder accepts both Polyurethane or Metal Blades and the Clear Lexan® Fixture provides quick and easy print alignment and set-ups.
A unique "Foil-Frame" Adapter Kit is Available for All Models - Allowing to mount Frameless Stencils (Foils), Greatly reducing Stencil costs. The SPR-20 is compaible with the FF-10/20 Foil-Frame Adapter Kit (Sold Separately).
SPR-20 Specs:
Adjustment Angle of Attack: Manual
Adjustable Dual-Squeegee Pressure Speed: Manual
X & Y Axis Adjustment: ± 0.5" (12.7mm)
Z Adjustment: 0-0.75" (19mm) - Four (4) Point Leveling
Theta Adjustment: Manual - Single Knob W/ True Theta (± 3° Range)
Adjustable To Various Sized Frames: Yes
Clear Lexan® Fixture (For Initial Registration): Yes [For Y & Ø (Theta)]
Nesting Kit Option (For Double-Sided PCB's): Yes
Vacuum Hold Down Option: N/A
Metal Squeegee Option: Yes
Print Area (Maximum): 12" x 15" (305 x 380mm)
Outside Frame Dimensions: 20" x 17" (508 x 432mm)
Dimensions (Overall): 21" W x 28" L x 11" H (533 x 711 x 280mm)
Weight (Approx.): 50 lb (22.7 Kg)
Options -
Foil-Frame Option: Yes [FF-10/20 (Sold Separately)]
Stand Option: N/A