Electrical Properties -
Dissipative Surface Layer (Top) -
Rtt Resistance: 1 x 10(6) to < 1 x 10(9) ohms [Per ANSI/ESD S4.1 & ESD TR53 Standards]Rtg Resistance: 1 x 110(6) to < 1 x 10(9) ohms [Per ANSI/ESD S4.1 & ESD TR53 Standards]
Rtt Resistance: 1 x 10(6) to < 1 x 10(9) ohms [Per ANSI/ESD S4.1 & ESD TR53 Standards]
Rtg Resistance: 1 x 110(6) to < 1 x 10(9) ohms [Per ANSI/ESD S4.1 & ESD TR53 Standards]
Ground Plane Layer (Bottom) -
Rtt Resistance: < 1 x 10(6) ohms [Per ANSI/ESD S4.1 & ESD TR53 Standards]
Physical Properties -
Construction: Dual Layer Rubber Material [Vulcanized and may contain Sulfur]Mat Thickness: 0.060" (1.5mm)Mat Width: 30" (762mm)Mat Length: 40' (480")Color: Grey (Top), Black (Bottom)Embossing: Slight Texture [Color and texture may vary between lots and mills 2-Layer]Weight: 0.43 lbs./sq.ft (0.2 g/cm2)Hardness: 65 ± 5Shore: "A" [Per ASTM-D2240]
Construction: Dual Layer Rubber Material [Vulcanized and may contain Sulfur]
Mat Thickness: 0.060" (1.5mm)
Mat Width: 30" (762mm)
Mat Length: 40' (480")
Color: Grey (Top), Black (Bottom)
Embossing: Slight Texture [Color and texture may vary between lots and mills 2-Layer]
Weight: 0.43 lbs./sq.ft (0.2 g/cm2)
Hardness: 65 ± 5
Shore: "A" [Per ASTM-D2240]
Other Properties -
Heat Resistance: Does not melt or burn when coming into contact with hot solder and soldering irons.Chemical Resistance: Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines.Oil Absorption Resistance: Resists oil absorption to maintain physical and electrical properties.
Heat Resistance: Does not melt or burn when coming into contact with hot solder and soldering irons.
Chemical Resistance: Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines.
Oil Absorption Resistance: Resists oil absorption to maintain physical and electrical properties.
Tolerances-
Width Tolerance: ± 0.250"Length Tolerance: ± 0.250" every 1 linear foot of running material.Thickness ±10%
Width Tolerance: ± 0.250"
Length Tolerance: ± 0.250" every 1 linear foot of running material.
Thickness ±10%