The 8007-0433 is the ST450 Pre-Heater with 97-127 VAC - 50/60 HZ (1000W). The ST450 is an analog, closed loop, controlled convective 1000W Pre-Heater. The heating area is 5.5" x 5.5". This pre-heater is ideal for applications where focused hot air is desirable or where cooling air is required after the application of heat such as area array processes. The ST450 can be used as is or one of 3 "air wash" nozzles can be attached to focus heat where it is needed. The ST450 can be used as a stand alone unit with either the ST525 or ST550 PC board holders. This Pre-Heater can be used with the ST300, ST325 or ST350 Convective Rework Systems. When used with the ST325/ ST350 (and optional software package) the heater activity of the ST450 can be controlled through the ST325 or ST350. The ST450 is completely self-contained and when in cooling mode, the airflow is increased to 50 cfm. The ST450 dimensions are 4"H x 7"W x 12.5"D.
*NOTE: The 4058-0003 Focus Nozzle is included with this system (4.5"). Other Focus Nozzles are available 4058-0001 (1.5" Square Nozzle) and the 4058-0002 (3" Square Nozzle)