UFC Series "Ultra-Fine" Tip Cartridges
The UFC Series Tip Cartridges are compatible with the Connection Validation (CV) Technology, which evaluates the quality of a solder joint by calculating the intermetallic compound formulation and provides closed-loop feedback instantly to the operator. The solder joint validation is signified via the LED light ring integrated into the hand-piece. Illuminating "Green" when a proper joint occurs and "Red" when a joint is unsatisfactory. This process eliminates the risk associated with multiple variables involved in soldering applications and removes the success/failure determination of a good solder joint out from the hands of the operator. This helps complement the operators skill for judging the quality of a solder joint by introducing an objective method of evaluating solder joint quality. The process also provides a systemic and objective approach for repeatability as well as a measurable standard to the soldering process. These tips are also constructed using SmartHeat® Technology, which senses the specific thermal demand directly at the solder pad. Delivering the precise quantity and flow of thermal energy during both flux activation and intermetallic bonding phases without any adjustment or calibration to both the iron and/or the power supply.
The UFC Series are an "Ultra-Fine" Tip Cartridge Series, which provide tip sizes ranging from 0.0078" (0.021mm) to 0.048" (1.2mm) Wide. Ideal for soldering low mass or small part components. The UFC series is available in your choice of three (3) geometric styles, Chisel, Hoof and Conical. All UFC Tip Cartridges feature your choice of two (2) temperature ranges 600°F, maxing out at 675°F (357°C) or 700°F offering a maximum temperature of 775°F (412°C). The temperature range is indicated in the first (1st) digit of the part number (UFC-6CH5106S). This tip series is designed for use with the CV-Series Soldering Systems, using the CV-H2-UF "Ultra-Fine" Connection Validation Solder Iron Hand-Piece.