When fitting the Super Long Working Distance (SLWD) lenses, they can only be fitted in the front turret position & the turret will not be able to rotate when they are in place. When in use the Super Long Working Distance Lenses require illumination deflectors to be fitted below the lighting. These deflectors focus the light on the correct place for optimum performance with the SLWD lenses. To fit the illumination deflectors, place the left and right versions on the appropriate sides of the unit so it matches up with the mounting holes and covers the existing LEDs. Use the fittings provided to screw the deflectors into place.
Fitting can be done at any of the 3 lens positions, but the back right position offers the clearest access to the thumbscrew.
1. Make sure the thumbscrew is wound out enough to allow the lens to fit.2. Insert top lip of lens into one of the 3 turret positions.3. Push the lens up so it is as far in as it can go and flat.4. Tighten up the thumbscrew to secure the lens.*To remove the lens, undo the thumbscrew while supporting the lens from below.
Magnification: 6xWorking Distance: 4.48" (114mm)Field of View (FOV): 0.88" (22.5mm)Pupil Diameter: 0.67" (17mm)Compatible Microscope(s): Mantis PIXO; Mantis ERGO
![Vision Engineering MTO007 6x SLWD Objective Lens [For Mantis PIXO, ERGO]](assets/templates/common-core/images/spacer.gif)
[ITEMPRICE]